Assembly Instruction

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
WELLS 6-DRAWER DRESSER
Made in Vietnam - r02 Page 2 of 6
1 A) Insert 4 cam screws, 6 wood dowels and 6 cams
into top panel as shown. Make sure arrows on each cam
points toward nearest edge with holes.
B) Insert 2 cams into partition as shown.
A
3 A) Insert 6 wood dowels and 6 cams into bottom panel
as shown.
B) Attach 1 support leg to bottom panel by turning
threaded bolt clockwise.
top panel
left and right
side panels
NOTE: Do not
over tighten the
cam screws
B
top
crossbar
A
B
2 Insert 8 cam screws into left and right side panels as
shown. Secure, but do not over tighten, cam screws using a
phillips head screwdriver.
4 A) Insert 2 wood dowels and 4 cams into top crossbar
as shown.
B) Insert 2 wood dowels and 2 cams into bottom crossbar
as shown.
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
partition
A
B
bottom
crossbar
bottom
panel
support
leg