Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Wells Six-Drawer Dresser

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r02 Page 1 of 6

Thank you for purchasing the Wells 6-Drawer Dresser.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WELLS 6-DRAWER DRESSER

Missing hardware?

Please call 800.606.6387

for replacements.

20 - cam

screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

44 - back

screws

48 - drawer

screws

1 - washer

12 - pull

bolts

6 - pulls

20 - cams

16 - wood

dowels

WALL MOUNTING HARDWARE

1 - wall

strap

1 - screw

4 - partition

screws

phillips head screwdriver

(We recommend the use of hand tools instead of power tools.)

1- top panel 2 - back panels

4 - large

drawer fronts

1 - top

crossbar

6 - drawer

bottoms

2 - side panels

(1 right, 1 left)

1 - bottom

panel

1 - bottom

crossbar

4 - large

drawer backs

8 - large drawer sides

(4 right, 4 left)

4 - small drawer sides

(2 right, 2 left)

2 - small

drawer backs

2 - small

drawer fronts

1 - support

leg

allen wrench (included)

1 - partition

Summary of content (6 pages)

PAGE 1
WELLS 6-DRAWER DRESSER HARDWARE 16 - wood 4 - partition 44 - back dowels screws screws 20 - cam screws 48 - drawer screws 12 - pull bolts Missing hardware? Please call 800.606.6387 for replacements. 20 - cams WALL MOUNTING HARDWARE 1 - screw 1 - wall strap Thank you for purchasing the Wells 6-Drawer Dresser. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
WELLS 6-DRAWER DRESSER NOTE: Do not over tighten the cam screws A top panel NOTE: Make sure arrows on each cam point toward nearest edge with holes left and right side panels B partition 1 A) Insert 4 cam screws, 6 wood dowels and 6 cams into top panel as shown. Make sure arrows on each cam points toward nearest edge with holes. B) Insert 2 cams into partition as shown. B 2 Insert 8 cam screws into left and right side panels as shown.
PAGE 3
WELLS 6-DRAWER DRESSER 5 A) Fit dowels of bottom panel into corresponding holes of partition. Secure bottom panel to partition with 2 partition screws as shown, using an allen wrench. Do not over tighten the screws. B)Fit bottom crossbar into corresponding notch of partition. Secure bottom crossbar to partition with 1 screw as shown. C) Fit top crossbar into corresponding notch of partition. Secure top crossbar to partition with 1 partition screw as shown.
PAGE 4
WELLS 6-DRAWER DRESSER 7 A) Fit dowels of assembled unit into corresponding holes of left side panel as shown. Secure all cams. B) Repeat steps for right side panel. A left side panel top panel assembly bottom panel B bottom crossbar right side panel 8 Attach 2 back panels to assembled unit with 44 back screws as shown. Secure, but do not over tighten, the screws using a phillips head screwdriver. back panel Made in Vietnam - r02 Customer Service 800.967.
PAGE 5
WELLS 6-DRAWER DRESSER small drawer right side small drawer front NOTE: Make sure wheels are at the back small drawer left side 9 Attach small drawer left and right sides to small drawer front with 2 drawer screws per side as shown, using a screwdriver. small drawer bottom 10 Fit drawer bottom into grooves of small drawer sides and small drawer front as shown. pull B small drawer back A 11 A) Attach small drawer back to small drawer sides with 2 large screws per side as shown.
PAGE 6
WELLS 6-DRAWER DRESSER CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. WALL MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A.