Assembly Instruction

Made in Vietnam - r02 Page 2 of 4
WELLS NIGHTSTAND
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 A) Insert 3 cams and 2 wood dowels into crossbar as
shown. Make sure arrow on each cam points toward
nearest edge with holes.
B) Insert 1 cam screw, 6 cams, and 4 wood dowels into
top panel as shown. Secure, but do not over tighten, cam
screw with a phillips head screwdriver.
A
2 Fit cam screw of top panel into corresponding hole of
crossbar as shown. Using a screwdriver, turn cam
clockwise until it securely engages the cam screw.
3 Insert 6 cams and 4 wood dowels into fixed shelf as
shown.
4 Insert 7 cam screws into left and right side panels as
shown.
crossbar
NOTE: Do not over
tighten the cam screw
B
top panel
top panel
crossbar
fixed shelf
NOTE: Make sure arrow on
each cam points toward nearest
edge with holes
left and right
side panels