Assembly Instruction

WELLS MEDIA HUTCH
Made in Vietnam - r04 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 Fit dowels of assembled unit into corresponding holes
of left and right side panel as shown. Secure all cams.
top panel
right side
panel
2 A) Fit 2 wood dowels and 2 cams into partition as
shown.
B) Fit 4 wood dowels and 6 cams into back panel as
shown.
3 A) Fit dowels of back panel into corresponding holes of
top panel. Using a screwdriver, turn each cam clockwise
until it securely engages each cam screw.
B) Fit dowels of partition into corresponding holes of top
panel as shown. Secure cams.
C) Secure partition to back panel with 1 bolt, 1 spring
washer and 1 flat washer as shown, using an allen
wrench. Do not over tighten the bolts.
back panel
partition
A
B
back panel
partition
A
B
NOTE: Do not over
tighten the bolts
left side
panel
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the wood is finished with a protective clear lacquer.
5 With the assistance of another adult, carefully place
hutch on top of dresser (sold separately) as shown.
Secure hutch to dresser with 2 connecting plates and 4
screws as shown, using a screwdriver.
Assembly is now complete.
hutch
dresser
(sold separately)
connecting
plate
CLEANING AND CARE
C