Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
ASSEMBLY
Made in Vietnam - r02 Page 1 of 1
Thank you for purchasing the Wells Floor Mirror. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
WELLS FLOOR MIRROR
Missing hardware?
Please call 800.606.6387 for replacements.
allen wrench (included)
1 A) Attach crossbar to left and right
back supports with 1 bolt, 1 spring
washer and 1 flat washer per support
as shown. Secure, but do not over
tighten, bolts with an allen wrench.
B) With the assistance of another adult,
attach back support assembly to back
of mirror assembly with 4 bolts, 4
spring washers and 4 flat washers as
shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
6 - bolts 6 - spring washers 6 - flat washers
1 - mirror
assembly
2 - back supports
(1 left, 1 right)
1 - crossbar
mirror
assembly
back support
assembly
left back
support
right back
support
crossbar
A
B
NOTE: Do not over tighten the bolts