Assembly Instruction

WALL MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert screw (included) and washer through end wall strap and
into the top back of unit as shown.
B. Insert wall screw (not included) through end of wall strap and
into wall as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
wall
screw
wall
strap
wall
screw
(NOTE: Wall screw
not included. Please
consult your local
hardware store.)
WALL
NOTE: Insert screws 3/4"-1"
from the edge of the strap
washer
3/4”-1”
Made in Vietnam - r04 Page 4 of 4
WELLS CHIFFONIER
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
10 Fit drawer glides of small (A/B), medium (C/D) and
large (E/F) drawer assemblies into corresponding drawer
glides of assembly as shown. Press drawer front firmly to
secure.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
B
C
D
E
F
9 A) Attach small drawer back to corresponding small
drawer assembly with 4 drawer screws as shown.
B) Attach 1 pull to drawer front A with 2 pull bolts, using
a screwdriver. Do not over tighten the bolts.
Repeat step 9 for remaining small (A/B), medium (C/D)
and large (E/F) drawer assemblies.
small drawer
back
pull
NOTE: Do not over tighten the bolts
A
B