Assembly Instruction

Made in Vietnam - r04 Page 3 of 4
WELLS CHIFFONIER
8 Fit drawer bottom into corresponding grooves of small
drawer sides and drawer front.
Repeat step 8 for remaining small (A/B), medium (C/D)
and large (E/F) drawer assemblies.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
6 Attach back panel to assembly with 27 back screws,
using a screwdriver. Do not over tighten the screws. With
assistance of another adult, position unit upright.
A
7 A) Attach small left and right drawer sides to drawer
fronts (A/B) with 2 drawer screws as shown, using a
screwdriver.
B) Attach medium left and right drawer sides to drawer
fronts (C/ D) with 2 drawer screws.
C) Attach large left and right drawer sides to drawer
fronts (E/F) with 2 drawer screws.
NOTE: Do not over tighten the screws
back panel
B C
small right
drawer side
small left
drawer side
drawer front A/B
drawer front C/D drawer front E/F
drawer bottom
NOTE: Make sure wheels of drawer side
are assembled towards the back as shown
5 Fit dowels of top panel, bottom panel, top crossbar
and bottom crossbars into corresponding holes of left
side panel as shown. Secure all cams.
Repeat steps for right side panel.
bottom panel
top panel
right side
panel
left side
panel
top crossbar
bottom crossbars
NOTE: Make sure
wheels of glides
face forward as
shown