Assembly Instruction

Made in Vietnam - r04 Page 2 of 4
WELLS CHIFFONIER
4 Insert 9 cam screws into left and right side panels as
shown, using a screwdriver.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 A) Insert 6 cams, 1 cam screw and 4 wood dowels
into top panel as shown. Make sure arrow on each cam
points toward nearest edge with holes. Secure, but do not
over tighten, cam screws with a phillips head screwdriver.
B) Insert 6 cams and 4 wood dowels into bottom panel
as shown.
A
2 A) Insert 3 cams and 2 wood dowels into top
crossbar.
B) Insert 2 cams and 2 wood dowels into 2 bottom
crossbars.
3 Insert cam screw of top panel into corresponding hole
of top crossbar as shown. Using a screwdriver, turn cam
clockwise until it securely engages the cam screw.
NOTE: Do not over
tighten the cam screw
NOTE: Make sure arrow
on each cam points
toward nearest edge
with holes
B
top panel
bottom panel
A
B
bottom crossbar
top crossbar
left and right
side panels
top panel
top crossbar