Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r03 Page 1 of 2

Thank you for purchasing the Wells Bed. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WELLS BED

Missing hardware?

Please call 800.606.6387 for replacements.

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

8 - bolts 8 - wood

dowels

8 - flat

washers

8 - spring

washers

4 - screws

1 - headboard

1 - footboard 2 - support

legs

1 - center

support rail

1 - slat

assembly

2 - side rails

(1 left, 1 right)

PAGE 1
WELLS BED HARDWARE 8 - bolts 4 - screws 8 - wood dowels 8 - flat washers 8 - spring washers Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Wells Bed. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
WELLS BED 1 A) Insert 4 wood dowels into headboard and footboard as shown. B) With assistance of another adult, fit dowels of headboard into corresponding holes of left and right side rails as shown. Attach each side rail to headboard with 2 bolts, 2 spring washers and 2 flat washers as shown. Secure, but do not over tighten, bolts with an allen wrench. Repeat steps for footboard.