Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

WALKER MEDIA STAND

Made in China r03

Page 2 of 3

5 Place assembly upright and turn it around.

A. Attach the inner metal cross brace (brace with

threaded center hole) to the side frames with 2 screws as

shown. Secure with a phillips head screwdriver.

B. Fit outer metal cross brace over inner metal cross

brace and fasten to side frames with 2 screws.

C. Fasten cross brace intersection with 1 bolt. Secure with

screwdriver.

2 Insert 2 cams into each crossbar as shown. Make

sure arrow on each cam points towards the nearest edge

with a hole.

4 Fit crossbars onto cam screws of right side frame.

Secure each cam by turning clockwise with a phillips

head screwdriver.

3 Fit each cross bar onto the cam screws of the left

side frame as shown. Secure each cam by turning

clockwise with a phillips head screwdriver until each

cam securely engages each cam screw.

Arrow points

towards nearest

edge with hole