Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Walker Media Stand

Customer Service 800-967-6696 | http://www.crateandbarrel.com

WALKER MEDIA STAND

Made in China r03

Page 1 of 3

Thank you for purchasing the Walker Media Stand.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this

product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

3 - crossbars

1 - left side frame

1 - right side frame

2 - top & bottom

glass shelves (smaller)

1 - middle glass shelf

(larger)

1 - inner metal cross brace

(threaded center hole)

1 - outer metal cross brace

4 - screws

15 - rubber pads

6 - cam

screws

6 - cams 1 - bolt

Phillips head screwdriver

1 Insert 3 cam screws into each side frame as shown.

Secure, but do not over tighten, with a phillips head

screwdriver.

Summary of content (3 pages)

PAGE 1
WALKER MEDIA STAND HARDWARE 6 - cam screws 4 - screws Thank you for purchasing the Walker Media Stand. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 6 - cams 1 - bolt 15 - rubber pads Missing hardware? Please call 800.
PAGE 2
WALKER MEDIA STAND Arrow points towards nearest edge with hole 2 Insert 2 cams into each crossbar as shown. Make sure arrow on each cam points towards the nearest edge with a hole. 3 Fit each cross bar onto the cam screws of the left side frame as shown. Secure each cam by turning clockwise with a phillips head screwdriver until each cam securely engages each cam screw. A B 4 Fit crossbars onto cam screws of right side frame. Secure each cam by turning clockwise with a phillips head screwdriver.
PAGE 3
WALKER MEDIA STAND A CLEANING AND CARE B Clean surfaces with a dry or damp soft cloth. Use glass cleaner on shelves as necessary. Do not use abrasive cleaners. C 6 A. Adhere 5 rubber pads to each shelf frame as shown. B. With the assistance of another adult, carefully place 1 middle glass shelf onto rubber pads of the middle shelf. C. Carefully place top & bottom glass shelves into position as shown. Assembly is now complete. Page 3 of 3 Made in China r03 Customer Service 800-967-6696 | http://www.