Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

Made in China R05

Page 3 of 3

WALKER MEDIA TOWER

Adhere 20 small rubber pads to the frames, as illustrated

above. Press each firmly to secure.

Carefully place 1 small glass panel on the top and

bottom shelves, and the remaining 3 large glass panels

on the middle shelves. Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Use glass

cleaner on shelves as necessary. Do not use abrasive cleaners.

With assistance of another adult, turn assembly upright.

Attach assembled metal cross brace to back of the

bookshelf by fastening 4 small screws into predrilled

holes in the frame. Secure each with a screwdriver.

Optional Wall Attachment Hardware:

These instructions are for drywall mounting only. For

safe mounting it is essential to use the proper hardware

for your wall type. Be sure to consult your local hardware

store to determine the hardware needed for your wall

(plaster, drywall, concrete, etc.) This product is only

deterrent. It is not a substitute for proper adult supervision.

A) Drill a pilot hole in the wall slightly smaller in diameter

than the drywall anchor. Gently tap anchor with a

hammer if necessary until it is flush with the surface of the

drywall.

B) Screw the wall bracket to the wall using a large screw.

Place the tower in front of the wall bracket. Screw the wall

bracket to the top of the side frame using medium screw.

Note: Mount to wood studs whenever possible. If screw is

aligned with a wood stud, screw directly into the wood stud

and do not use the drywall anchor.

Small

Large

Small