Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
Made in China R05
Page 2 of 3
WALKER MEDIA TOWER
A. Insert 2 cams in the underside of each crossbar.
Make sure the arrow on each cam points towards the
closest short end of each crossbar.
B. Fit 5 crossbars onto the right side frame, aligning
cam screws with corresponding holes. Make sure holes
on the side frame face up.
1
A. Fit 5 crossbars onto the left side frame, aligning cam
screws with corresponding holes.
B. Turn cams clockwise using a Philip head screwdriver
to secure side frame to crossbars.
2
3
4
Assemble the 2 metal cross braces, located in packing
foam with red ribbon. Using the allen wrench, tighten 1
small allen bolt to center of cross brace.
Insert 10 cam screws into both side frames. Secure with
a phillips head screwdriver.
x10
x10
A
A
B
A
Make sure
these holes
face up