Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

WALKER MEDIA TOWER

Made in China R05

Page 1 of 3

Thank you for purchasing the Walker Tower. This page

lists

all the contents included in the box. Please take the time

identify the hardware as well as the individual components

this product. As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

1 - left side frame 1 - right side frame

3 - large glass panels

5 - crossbars

2 - metal cross braces

4 - small

screws

20 - rubber

pads

10 - cam

screws

10 -cams

1 - small

allen bolt

1 - wall

bracket

1 - medium

screw

1 - large

screw

2 - small glass panels

1 - drywall anchor

Allen wrench (included) Phillips head screwdriver

PAGE 1
WALKER MEDIA TOWER HARDWARE 1 - small allen bolt 4 - small screws 10 -cams 10 - cam screws 20 - rubber pads 1 - wall bracket 1 - medium screw 1 - large screw 1 - drywall anchor Thank you for purchasing the Walker Tower. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
WALKER MEDIA TOWER A Make sure these holes face up x10 B A 1 Insert 10 cam screws into both side frames. Secure with a phillips head screwdriver. 2 A. Insert 2 cams in the underside of each crossbar. Make sure the arrow on each cam points towards the closest short end of each crossbar. B. Fit 5 crossbars onto the right side frame, aligning cam screws with corresponding holes. Make sure holes on the side frame face up. x10 A 3 A.
PAGE 3
WALKER MEDIA TOWER 5 With assistance of another adult, turn assembly upright. Attach assembled metal cross brace to back of the bookshelf by fastening 4 small screws into predrilled holes in the frame. Secure each with a screwdriver. 6 Adhere 20 small rubber pads to the frames, as illustrated above. Press each firmly to secure. A Small B Large Large Large Small 7 Carefully place 1 small glass panel on the top and bottom shelves, and the remaining 3 large glass panels on the middle shelves.