Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
WALKER DESK
Page 3 of 3
Made in China
8 A. With the assistance of another adult, place desk
upright. Remove adhesive backer from 6 rubber bumpers
and position as indicated.
B. Place glass top into position, making sure it is firmly
seated on rubber bumpers. Assembly is now complete.
A
B
6 A. Attach 2 wire braces to the frame. Fasten threaded
fitting to the underside of the keyboard drawer with 1
medium screw, 1 large washer and 1 spacer.
B. Use 1 short screw and 2 large washers to attach the
bottom loop to the base of the side frame.
7 At the top of each wire brace, turn each threaded fitting
clockwise until each wire brace is taught.
x 2
x 2
A
B
x 2
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.