Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
5 Secure lower cross bar to side panels by turning both
cams 90 degrees with a phillips head screwdriver.
WALKER DESK
Page 2 of 3
Made in China
2 A. Fit keyboard tray into position, aligning dowels with
corresponding holes in side frame. Using allen wrench,
attach with 3 long screws, 3 spring washers and 3 small
washers.
B. Insert dowels of top cross bar into corresponding holes
in side frame.
x 2
3 A. Insert 1 cam screw into lower hole on side frame and
tighten with a phillips head screwdriver.
B. Place lower cross bar into position, aligning wood dowel
and cam screw with corresponding holes. Make sure cams in
cross bar face down.
A
B
4 A. Insert 1 cam screw into lower hole of side frame
and secure with a phillips head screwdriver.
B. Fit remaining side frame onto keyboard tray, upper
and lower crossbars. Attach with 3 long screws, 3
spring washers and 3 small washers. Secure all screws
with the allen wrench.
Cams face
down
A
B
A
B