Assembly Instruction

Made in China - r04 Page 6 of 6
17 A) Attach drawer into assembled unit, fitting glides on
drawer with corresponding glides on the inside of assembled
unit.
B) Place shelf into assembled unit. Make sure shelf is
securely supported by each shelf support.
VINTNER WINE TOWER
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
NOTE: This step must be preformed in
order to prevent injury due to possible
tipping. We recommend you do not
skip this step.
Customer Service 800.967.6696 | www.crateandbarrel.com
16 Insert 4 shelf supports into side panels of
assembled unit as shown between wine racks.
Press supports firmly to secure.
18 A) Insert 1 wall screw through wall strap and
into top panel of assembled unit as shown.
B) Drill a hole in the wall slightly smaller than the
diameter of the plastic anchor. Lightly tap
plastic anchor into hole until the anchor is flush
with the wall.
C) Insert 1 long screw through wall strap and into
the plastic anchor as shown.
Assembly is now complete.
SIDE VIEW
top panel
long
screw
wall
strap
wall
plastic
anchor
wall
screw
A
B