Assembly Instruction

Made in China - r044 Page 2 of 6
1 A) Insert 4 cam screws into the top panel as shown. Secure, but do not over tighten, screws with a phillips
head screwdriver.
B) Insert 8 cams into 2 middle panels. Make sure arrows on each cam point towards the nearest edge with
holes.
C) Insert 4 cam screws into the bottom panel as shown. Secure screws with a screwdriver.
VINTNER WINE TOWER
x2
2 A) Insert 8 cam screws into left and right side
panels.
B) Insert 8 cams into left and right side panels.
C) Insert 8 wood dowels into left and right side panels
as shown. Press firmly to secure.
3 A) Insert 8 wood dowels into 2 front wine racks.
B) Insert 8 wood dowels into 2 back wine racks.
C) Insert 4 wood dowels into 1 front top rail.
D) Insert 4 wood dowels into 1 front bottom rail.
4 A) Insert 4 wood dowels into 2 middle panels as
shown.
B) Fit wood dowels of middle panels into the holes on
left side panel. Using a phillips head screwdriver,
turn cams clockwise until each cam securely engages
each cam screw.
left side panel
front wine rack
back wine rack
front top rail
front bottom rail
A
B
C
D
Customer Service 800.967.6696 | www.crateandbarrel.com
A
Make sure arrows
on each cam point
towards edge with
nearest holes
B
A
B
A
B
C
right side panel
A
B
C
C
top
panel
middle
panel
bottom
panel