Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Vintner High Dining Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r01 Page 1 of 4

Thank you for purchasing the Vintner High Dining

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

VINTNER HIGH DINING TABLE

Missing hardware? Please call

800.606.6387 for replacements.

12 - bolts 12 - spring

washers

12 - flat

washers

8 - small

screws

18 - large

screws

8 - shelf

supports

8 - shelf

pins

hex wrench (included)

phillips head screwdriver

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - tabletop

2 - leaves 1 - adjustable

shelf

1 - base frame

1 - wine storage

1 - middle

support panel

4 - legs

Summary of content (4 pages)

PAGE 1
VINTNER HIGH DINING TABLE HARDWARE Thank you for purchasing the Vintner High Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
VINTNER HIGH DINING TABLE bolt spring washer flat washer 1 Attach 4 legs to base frame as shown with 1 bolt, 1 spring washer, and 1 flat washer per leg. Using a hex wrench, turn bolts clockwise to secure. A A B B NOTE: Each shelf pin can be inserted into either hole on each leg. 2 With the assistance of another adult, carefully place assembled unit upright. Fit wood dowels of middle support panel into holes of base frame as shown.
PAGE 3
VINTNER HIGH DINING TABLE Make sure middle support panel fits securely into groove of wine storage 4 With the assistance of another adult, carefully fit wine storage onto assembled unit as shown. Make sure middle support panel fits securely into groove of wine storage. 5 Carefully place tabletop face down. Attach 2 leaves onto tabletop as shown with 18 large screws. Secure, but do not over tighten, screws with a phillips head screwdriver.
PAGE 4
VINTNER HIGH DINING TABLE 8 Place 2 adjustable shelves onto shelf pin as shown. Make sure shelf is securely supported by each shelf pin. 9 Using a phillips head screwdriver, insert 1 small screw through each shelf support to secure wine storage to assembled unit. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.