Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Vintner Dining Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04 Page 1 of 4

Thank you for purchasing the Vintner Dining Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

VINTNER DINING TABLE

Missing hardware? Please call

800.606.6387 for replacements.

12 - bolts 12 - spring

washers

12 - flat

washers

8 - small

screws

18 - large

screws

8 - shelf

supports

8 - shelf

pins

hex wrench (included)

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - tabletop

2 - leaves

2 - adjustable

shelves

1 - base frame

1 - wine storage

1 - middle

support panels

4 - legs

Summary of content (4 pages)

PAGE 1
VINTNER DINING TABLE HARDWARE 12 - bolts 12 - spring washers 12 - flat washers 18 - large screws 8 - shelf supports 8 - shelf pins 8 - small screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Vintner Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
VINTNER DINING TABLE A bolt A spring washer flat washer Make sure labels on each base frame and leg component match up when assembling. B B 1 Attach 4 legs to base frame as shown with 1 bolt, 1 spring washer, and 1 flat washer per leg. Using a hex wrench, turn bolts clockwise to secure. NOTE: Make sure letters labeled on components match up. A A B B 2 With the assistance of another adult, carefully place assembled unit upright.
PAGE 3
VINTNER DINING TABLE Make sure middle support panel fits securely into groove of wine storage 4 With the assistance of another adult, carefully fit wine storage onto assembled unit as shown. Make sure middle support panel fits securely into groove of wine storage. 5 Carefully place tabletop face down. Attach 2 leaves onto tabletop as shown with 18 large screws. Secure, but do not over tighten, screws with a phillips head screwdriver.
PAGE 4
VINTNER DINING TABLE 8 Place 2 adjustable shelves onto shelf supports as shown. Make sure shelf is securely supported by each shelf support. 9 Using a phillips head screwdriver, insert 1 small screw through each shelf support to secure wine storage to assembled unit. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.