Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Vintner Buffet

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04 Page 1 of 5

Thank you for purchasing the Vintner Buffet. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

VINTNER BUFFET

Missing hardware? Please call 800.606.6387 for replacements.

1 - top panel 1 - adjustable shelf2 - doors

(1 left, 1 right)

3 - back panels

(1 top, 1 middle, 1 bottom)

2 - side panels

(1 left, 1 right)

1 - partition4 - feet1 - bottom panel1 - fixed shelf

2 - drawer sides

(1 left, 1 right)

2 - drawer fronts2 - drawer bottoms2 - drawer backs

16 - wood

dowels

26 - back

screws

16 - bolts 4 - pull

bolts

16 - drawer

screws

4 - shelf

pins

16 - flat

washers

4 - pulls

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

16 - spring

washers

Summary of content (5 pages)

PAGE 1
VINTNER BUFFET HARDWARE 16 - wood dowels 26 - back screws 16 - bolts 4 - pull bolts 16 - flat washers 16 - spring washers 16 - drawer screws 4 - shelf pins Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Vintner Buffet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
VINTNER BUFFET A left and right side panels right side panel fixed shelf B partition 1 A) Insert 4 wood dowels into left and right side panels as shown. B) Insert 2 wood dowels into partition as shown. left side panel 2 Fit dowels of left and right side panels into corresponding holes of fixed shelf as shown. Secure each side panel with 2 bolts, 2 spring washers and 2 flat washers, using an allen wrench. Do not over tighten the bolts.
PAGE 3
VINTNER BUFFET A partition top panel top panel B B 5 With the assistance of another adult, carefully position unit upright. Fit dowels of partition into corresponding holes of assembled unit as shown. Secure partition with 2 bolts, 2 spring washers, 2 flat washers as shown. 6 A) Insert 6 wood dowels into top panel as shown. B) Fit dowels of top panel into corresponding holes of assembled unit. Secure top panel wtih 6 bolts, 6 spring washers, 6 flat washers as shown.
PAGE 4
VINTNER BUFFET A drawer left A drawer right B drawer back adjustable shelf 9 A) Insert 4 shelf pins at desired heights as shown. B) Place adjustable shelf into assembled unit. Make sure shelf is securely supported by each shelf pin. 10 Attach drawer left and right to drawer back with 2 drawer screws as shown, using a screwdriver. drawer front drawer bottom 11 Slide drawer bottom into grooves of drawer assembly as shown.
PAGE 5
VINTNER BUFFET drawer assembly pull 13 Attach 1 pull to each drawer front with 1 pull bolt as shown. Repeat steps 10-13 for remaining drawer assembly. 14 Fit glides of drawer assemblies into corresponding glides of assembled unit as shown. Assembly is now complete. CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer.