Assembly Instruction

VIEW SIDE TABLE
Made in China - r08 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 A) Attach right drawer side to drawer front and
drawer back with 4 screws as shown. Secure, but do
not over tighten, the screws using a phillips head
screwdriver.
B) Slide drawer bottom into corresponding grooves of
drawer assembly as shown.
C) Attach left drawer side to drawer front and back
with 4 screws as shown.
6 Attach 1 pull to drawer assembly with 2 pull bolts.
Secure, but do not over tighten, bolts using a phillips
head screwdriver.
drawer front
A
B
NOTE: Do not over
tighten the screws
C
drawer bottom
drawer back
left drawer
side
right drawer
side
NOTE: Do not over
tighten the bolts
pull
7 Fit drawer glides of drawer assembly into corresponding
drawer glides of assembled unit as shown.
glass top
NOTE: Make sure wheels
are at back of drawer side
8 Carefully place glass top into assembled unit as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not
use furniture wax or polish as the wood is finished with a protective clear lacquer.