Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel View Side Table

COMPONENTS

Made in China - r08 Page 1 of 3

Thank you for purchasing the View Side Table. This page

lists all the contents included in the box. Please take time to

identify the hardware as well as the individual components

of this product. As you unpack and prepare for assembly,

place the contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are recommended to safely assemble this product.

VIEW SIDE TABLE

1 - drawer

front

1 - glass top

1 - drawer

bottom

2 - side frames

(1 left, 1 right)

2 - top

crossbars

1 - back panel

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

18 - wood

dowels

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

2 - drawer

sides

(1 right, 1 left)

8 - screws 18 - cam

screws

2 - pull

bolts

18 - cams

18 - cam

covers

1 - shelf

1 - bottom

crossbar

NOTE: Do not

over tighten the

cam screws

back panel

1 A) Insert 8 cams into shelf as shown. Make sure

arrows on each cam point toward nearest edge with

holes.

B) Insert 2 wood dowels, 2 cam screws and 4 cams into

back panel as shown. Secure, but do not over tighten,

cam screws using a phillips head screwdriver.

NOTE: Make sure

arrows on each cam

point toward nearest

edge with holes

shelf

1 - pull

1 - drawer

back

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (3 pages)

PAGE 1
VIEW SIDE TABLE ASSEMBLY HARDWARE 8 - screws 18 - cams 2 - pull bolts 18 - cam covers 18 - wood dowels 18 - cam screws Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the View Side Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
VIEW SIDE TABLE shelf A left and right side frames B top crossbar back panel bottom C crossbar 2 A) Insert 8 wood dowels and 8 cam screws into left and right side frames as shown. B) Insert 2 cams into top crossbars as shown. C) Insert 2 cams into bottom crossbar as shown. 3 Fit dowels of back panel into corresponding holes of shelf as shown. Using a screwdriver, turn each cam clockwise until it securely engages each cam screw.
PAGE 3
VIEW SIDE TABLE NOTE: Do not over tighten the screws A B drawer bottom right drawer side NOTE: Do not over tighten the bolts drawer front C drawer back left drawer side NOTE: Make sure wheels are at back of drawer side pull 5 A) Attach right drawer side to drawer front and drawer back with 4 screws as shown. Secure, but do not over tighten, the screws using a phillips head screwdriver. B) Slide drawer bottom into corresponding grooves of drawer assembly as shown.