Assembly Instruction

VIEW CONSOLE
Made in China - r11 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 A) Insert 3 cams and 1 wood dowel into partition as
shown.
B) Insert 4 cams, 5 cam screws and 5 wood dowels into
back panel as shown.
C) Insert 2 cams into top crossbars as shown.
D) Insert 2 cams into bottom crossbar as shown.
left and right
side frames
top
crossbar
3 Fit dowels of shelf into corresponding holes of parti-
tion as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
A
bottom
crossbar
C
partition
shelf
NOTE: Do not
over tighten the
cam screws
partition
1 A) Insert 8 cams, 2 wood dowels and 2 cam screws
into shelf as shown. Make sure arrows on each cam point
toward nearest edge with holes. Secure, but do not over
tighten, cam screws using a phillips head screwdriver.
B) Insert 8 wood dowels and 7 cam screws into left and
right side frames as shown.
NOTE: Make sure
arrows on each cam
point toward nearest
edge with holes
B
A
shelf
D
4 With the assistance of another adult, fit dowels of
back panel into corresponding holes of partition and
shelf as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
back panel
NOTE: Make sure
wheel is positioned
as shown
B
back panel