Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel View Coffee Table

COMPONENTS

Made in China - r09 Page 1 of 4

Thank you for purchasing the View Coffee Table. This

page lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are recommended to safely assemble this product.

VIEW COFFEE TABLE

2 - drawer

fronts

1 - glass top

2 - drawer

bottoms

2 - side frames

(1 left, 1 right)

2 - top

crossbars

1 - bottom

crossbar

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

23 - wood

dowels

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

4 - drawer sides

(2 right, 2 left)

17 - screws 25 - cam

screws

4 - pull

bolts

25 - cams

25- cam

covers

1 - shelf

1 - back

panel

2 - pulls

2 - drawer

backs

1 - partition

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
VIEW COFFEE TABLE ASSEMBLY HARDWARE 17 - screws 25 - cams 4 - pull bolts 25- cam covers 23 - wood dowels 25 - cam screws Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the View Coffee Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
VIEW COFFEE TABLE NOTE: Do not over tighten the cam screws NOTE: Make sure arrows on each cam point toward nearest edge with holes A partition B back panel A shelf left and right B side frames C 1 A) Insert 10 cams, 2 wood dowels and 3 cam screws into shelf as shown. Make sure arrows on each cam point toward nearest edge with holes. Secure, but do not over tighten, cam screws using a phillips head screwdriver. B) Insert 8 wood dowels and 8 cam screws into left and right side frames as shown.
PAGE 3
VIEW COFFEE TABLE 5 Fit dowel of partition into corresponding hole of bottom crossbar as shown. Secure bottom crossbar to partition with 1 screw, using a phillips head screwdriver. Do not over tighten the screw. bottom crossbar NOTE: Do not over tighten the screw 6 A) Fit dowels of right side frame into corresponding holes of top crossbars, shelf assembly and bottom crossbar as shown. Secure all cams. Repeat step A for left side frame. B) Cover all exposed cams with cam covers.
PAGE 4
VIEW COFFEE TABLE NOTE: Do not over tighten the screws A B drawer bottom right drawer side NOTE: Do not over tighten the bolts drawer front C drawer back left drawer side NOTE: Make sure wheels are at back of drawer side pull 7 A) Attach right drawer side to drawer front and drawer back with 4 screws as shown. Secure, but do not over tighten, the screws using a phillips head screwdriver. B) Slide drawer bottom into corresponding grooves of drawer assembly as shown.