Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
11 Insert drawer assembly into case, inserting wheels
on drawer sides into glides on the case interior.
Assembly of the base cabinet is now complete.
VENETIAN BATH BASE CABINET
Page 4 of 4
Made in China - r06
10 A. Fit dowels of drawer back panel and drawer
front panel into holes on left drawer side panel. Secure
with 4 large wood screws, but do not over tighten.
B. Slide drawer bottom panel into slot at base of back,
side and drawer front panels.
C. Fit remaining drawer side panel onto assembly and
secure with 4 large wood screws.
D. Attach pull with 1 pull screw as shown. Secure with
a screwdriver.
Make sure
wheels on
drawer glides
are at the back
NOTE:
Do not over tighten
the screws.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners.
9 A. Place door into position, aligning holes in hinges
with holes on side panel edges. Secure with 2 small
wood screws per hinge, but do not over tighten.
B. Attach pull to door front, securing with 1 pull screw.
C. Conceal all exposed cams with the cam covers.
x 2
B
A
C