Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
3 Fit cam screws of remaining side panel into the
middle shelf. Secure both cams by turning clockwise
with a phillips head screwdriver.
A
B
1 A. Insert 4 cams into the middle shelf as shown.
Make sure the arrow on each cam points towards edge
with dowels.
B. Insert 2 cam screws into the inner holes of each side
panel as shown. Secure with the phillips head
screwdriver.
2 A. Fit middle panel into position, aligning cam screws and
dowels as shown.
B. Secure middle panel by turning each cam approximately
90º clockwise with a phillips head screwdriver until secure.
VENETIAN BATH BASE CABINET
Page 2 of 4
Made in China - r06
x 2
Make sure
arrow on
each cam
points towards
edge with
dowels
B
Cam in
unlocked
position
Cam in
locked
position
B
A
C
4 Insert 4 cam screws into the inner holes of the base
panel and secure with the screwdriver.
B. Insert 4 cam screws into the inner holes of the top
panel and secure with the screwdriver.
C. Turn side panel assembly upright and insert 8 cams,
making sure arrows on cams point towards edges with
dowels.
Make sure arrow
on each cam points
towards edge with
dowels
Base
Panel
Top
Panel