Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Venetian Cabinet Glass Door Top

Customer Service 800-967-6696 | http://www.crateandbarrel.com

TOP CABINET HARDWARE

Thank you for purchasing the Venetian Bath Cabinet

Top. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this

product.

TOP CABINET COMPONENTS

TOOLS REQUIRED

Phillips head screwdriver

(included)

1 A. Insert 2 cam screws into the inner holes of 1

side panel. Secure with the screwdriver.

B. Insert 4 cams into the base panel as shown.

Make sure the arrows on each cam point towards the

edge with dowels.

C. Fit base panel onto cam screws of side panel and

secure cams with the screwdriver.

1 - back panel

1 - top panel

1 - door

2 - side panels

(1 left, 1 right)

1 - base panel

2 - adjustable shelves

VENETIAN BATH TOP CABINET

Page 1 of 3

Made in China - r04

Missing hardware? Please call 800.606.6387 for

replacements.

1 - large

wood screw

8 - small

wood screws

1 - pull

screw

4 - flat

washers

1 - pull

2 - metal straps 8 - cam covers

8 - shelf

pins

1 - plastic

wall anchor

2 - metal

wall brackets

8 - cams8 - cam

screws

4 - split

washers

4 - machine

screws

1 - medium

wood screw

1 - wall

strap

Summary of content (3 pages)

PAGE 1
VENETIAN BATH TOP CABINET TOP CABINET HARDWARE 8 - small wood screws Thank you for purchasing the Venetian Bath Cabinet Top. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
VENETIAN BATH TOP CABINET 2 Insert 2 cam screws into remaining side panel. Fit onto base panel and secure cams. 3 Slide the back panel into the slot at rear of side and base panels. C A B 4 A. Fasten 4 cam screws to inner holes of top panel. B. Insert 4 cams into holes at top of case assembly. C. Fit top panel onto case assembly and secure 4 cams with the screwdriver. 5 Turn case assembly upright . Insert 8 shelf pins at desired shelf heights and place 2 adjustable shelves into position.
PAGE 3
VENETIAN BATH TOP CABINET TOP & BASE CABINET ASSEMBLY x2 A x4 C A B B 6 A. Place door into position, aligning holes in hinges with holes on side panel edges. Secure with 2 small wood screws per hinge, but do not over tighten. B. Attach pull to door front, securing with 1 pull screw. C. Complete assembly by concealing all exposed cams with cam covers. x2 7 A. Secure back panel with 4 large machine screws, 4 split washers and 4 flat washers per cabinet. B.