Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Venetian Cabinet Base

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BASE CABINET HARDWARE

Thank you for purchasing the Venetian Bath

Cabinet Base. This page lists all the contents

included in the box. Please take time to identify the

hardware as well as the individual components of

this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

BASE CABINET COMPONENTS

1 - top panel 1 - middle panel

TOOLS REQUIRED

Phillips head screwdriver

(included)

1 - door panel

2 - drawer side

panels (1 right, 1 left)

1 - drawer back

panel

2 - side panels

(1 right, 1 left)

1 - base panel 2 - adjustable shelves

1 - back panel

1 - drawer front

panel

1 - drawer bottom

panel

VENETIAN BATH BASE CABINET

Page 1 of 4

Made in China - r06

Missing hardware? Please call 800.606.6387 for

replacements.

8 - large

wood screws

4 - small

wood screws

2 - pull

screws

4 - flat

washers

2 - pulls

12 - cam covers

8 - shelf

pins

12 - cams12 - cam

screws

4 - split

washers

4 - machine

screws

Summary of content (4 pages)

PAGE 1
VENETIAN BATH BASE CABINET BASE CABINET HARDWARE 4 - small wood screws 4 - flat washers Thank you for purchasing the Venetian Bath Cabinet Base. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
VENETIAN BATH BASE CABINET Make sure arrow on each cam points towards edge with dowels B A Cam in unlocked position Cam in locked position B x2 1 A. Insert 4 cams into the middle shelf as shown. Make sure the arrow on each cam points towards edge with dowels. B. Insert 2 cam screws into the inner holes of each side panel as shown. Secure with the phillips head screwdriver. 2 A. Fit middle panel into position, aligning cam screws and dowels as shown. B.
PAGE 3
VENETIAN BATH BASE CABINET B A 5 A. Attach base panel to side panel assembly, aligning all cam screws and dowels. Secure cams with the screwdriver. B. Slide back panel into slot at back of side and base panels. 6 Fit top panel onto assembly and secure by turning 4 cams clockwise. x4 7 Turn case assembly around. Attach top and base of back panel with 4 machine screws, 4 split washers and 4 flat washers as shown. Secure with a phillips head screwdriver. 8 Insert 8 shelf pins at desired shelf heights.
PAGE 4
VENETIAN BATH BASE CABINET Make sure wheels on drawer glides are at the back x2 A NOTE: Do not over tighten the screws. B C 9 A. Place door into position, aligning holes in hinges with holes on side panel edges. Secure with 2 small wood screws per hinge, but do not over tighten. B. Attach pull to door front, securing with 1 pull screw. C. Conceal all exposed cams with the cam covers. 10 A. Fit dowels of drawer back panel and drawer front panel into holes on left drawer side panel.