Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
VAUGHN HUTCH
Made in Denmark 2004
Page 2 of 2
2 A. Insert 4 cams into the holes on the inner face of the
left and right side panels. Make sure arrows on the cams
point down towards the holes in the edge.
B. Fit side panels onto cam screws and wood dowels.
C. Peel and stick 4 plastic feet onto the side panels.
4 A. Insert 1 machine screw through the hole in each
drawer front and into the drawer pull. Tighten with a
screwdriver. Repeat for remaining 3 drawers.
B. Peel and stick 4 plastic feet onto the underside of
the drawer unit.
5 Place drawer units and shelf into position on desktop.
Assembly is now complete.
3 A. Using a screwdriver, turn 4 cams 90 degrees clockwise
to secure the shelf panel to the left & right side panels.
B. Conceal cams by inserting 4 cam covers.
Make sure this
arrow points
towards holes
in the edge
x 4
x 2
CLEANING AND CARE
Clean wood surfaces with a damp cloth. Do not use
furniture wax or polish as the wood is finished with a
protective clear lacquer.
A
B
C
A
B