Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN HUTCH

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in Denmark 2004

Page 1 of 2

Thank you for purchasing the Vaughn Hutch.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

4 - machine

screws

2 - drawer units

2 - side panels

(1 left, 1 right)

2 - wood

dowels

4 - cams

4 - cam

covers

12 - plastic

feet

4 - drawer

pulls

4 - cam

screws

1 - shelf panel

1 A. Fasten 4 cam screws into the pre-drilled holes

on the underside of the shelf panel using a screwdriver.

B. Insert 2 wood dowels into the pre-drilled holes

between the cam screws.

PAGE 1
VAUGHN HUTCH HARDWARE 4 - machine screws 2 - wood dowels 4 - cam covers Thank you for purchasing the Vaughn Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
VAUGHN HUTCH Make sure this arrow points towards holes in the edge B C A x4 B A 2 A. Insert 4 cams into the holes on the inner face of the left and right side panels. Make sure arrows on the cams point down towards the holes in the edge. B. Fit side panels onto cam screws and wood dowels. C. Peel and stick 4 plastic feet onto the side panels. 3 A. Using a screwdriver, turn 4 cams 90 degrees clockwise to secure the shelf panel to the left & right side panels. B.