Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN DESK

HARDWARE & COMPONENTS

Made in Denmark 2004

Page 1 of 2

Thank you for purchasing the Vaughn Desk.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

2 - machine

screws

4 - protective

glides

1 - desktop

4 - legs (hex nut

& washer attached)

2 - drawer

pulls

1 With the assistance of another adult, lay desktop upside down on a carpeted or padded surface. Unscrew the

hex nut & washer from each leg. Place each leg into postion and insert bolt through hole in the metal corner bracket.

Re-attach the washer, followed by the hex nut and tightly secure with the hex wrench provided. Repeat for the

remaining 3 legs.

TOOLS REQUIRED

Phillips head screwdriver

Hex wrench (included)

x 4

PAGE 1
VAUGHN DESK HARDWARE & COMPONENTS 2 - machine screws 2 - drawer pulls 4 - legs (hex nut & washer attached) Thank you for purchasing the Vaughn Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
VAUGHN DESK 2 Remove the adhesive backer from each protective glide. Firmly attach 1 glide to the bottom of each leg. 3 With the assistance of another adult, lift the desk into an upright positon. Insert 2 machine screws through holes in the drawer front and into the drawer pulls. Tighten both screws with a screwdriver. CLEANING AND CARE Clean wood surfaces with a damp cloth. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 4 Assembly is now complete.