Assembly Instruction

CLEANING AND CARE

Clean surfaces with a dry or damp

soft cloth. Do not use abrasive cleaners.

Do not use furniture wax or polish as

the wood is finished with a protective

clear lacquer.

NOTE: Make sure

holes of shelf are

facing up as shown

3 Fit 1 shelf into notches of legs as shown. Secure each

leg to shelf with 1 bracket, 2 small bolts, 2 spring

washers and 2 flat washers as shown, using a screwdriver.

4 A) Fit dowel of tabletop into corresponding hole of left back leg and notches

of left back leg into shelves of assembled unit. Secure left back leg to

tabletop with 1 large bolt as shown.

B) Secure each shelf to left back leg with 1 bracket, 2 small bolts, 2 spring

washers and 2 flat washers as shown. At this point, fully tighten all bolts using

a screwdriver. Do not over tighten the bolts. Carefully position assembled unit

upright.

Assembly is now complete.

NOTE: Do not over

tighten the bolts

UNION CONSOLE TABLE

Made in China - r10 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 Fit 1 shelf into notches of legs as shown. Secure each

leg to shelf with 1 bracket, 2 small bolts, 2 spring

washers and 2 flat washers as shown, using a screwdriver.

left

back leg

bracket