Manualshelf

Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Union Console Table
12
HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in China - r10 Page 1 of 2
Thank you for purchasing the Union Console Table. This
page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
UNION CONSOLE TABLE
Missing hardware?
Please call 800.606.6387 for replacements.
1 - tabletop
2 - front
legs
phillips head screwdriver
(We recommend the use of hand tools instead power tools)
2 - shelves
2 - back legs
(1 left, 1 right)
1 A) Place tabletop onto a clean, padded surface. Attach 2 front
legs to tabletop with 2 medium bolts, 2 spring washers and 2
flat washers as shown. Do not fully tighten bolts.
B) Insert 2 wood dowels into tabletop as shown.
C) Fit dowel into corresponding hole of right back leg. Secure leg
with 1 large bolt, 1 spring washer and 1 flat washer as shown. Do
not fully tighten the bolts.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 - brackets
22 - flat
washers
C
NOTE: Do not fully
tighten the bolts
A
2 - wood
dowels
2 - large
bolts
4 - medium
bolts
front leg
tabletop
16 - small
bolts
front leg
right
back leg
C
22 - spring
washers
A
B

Summary of content (2 pages)