Assembly Instruction

Made in China - r03 Page 2 of 2
LARGE UMBRELLA STAND
B
A
adaptor ring
SMALL UMBRELLA
ASSEMBLY (1.5”DIA)
small umbrella
assembly
(sold separately)
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 A) With the assistance of another
adult, fit pole of small umbrella
assembly (sold separately) into
corresponding hole of base
assembly as shown.
B) Insert knob into base assembly
as shown. Turn knob clockwise to
secure. Assembly is now complete.
B
A
base
assembly
knob
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
1 A) Position base upright as shown. For the small
umbrella assembly (sold separately), remove 1
pre-installed adaptor ring from post as shown.
B) Fit 1 adaptor ring into post as shown.
C) Insert threaded bolt of post into base as shown.
Turn post clockwise to secure. Make sure post is
securely engaged with base.
C
pre-installed
adaptor ring