Assembly Instruction

COMPONENTS

1 A) Fit umbrella cover (sold separately) over umbrella

frame as shown. Tuck each end of frame into correspond-

ing pocket of cover.

B) Attach finial to top of umbrella assembly. Turn finial

clockwise to secure.

ASSEMBLY

A B

Made in Indonesia - r04 Page 1 of 2

Thank you for purchasing the Rectangular Market

Umbrella. This page lists all the contents included in

the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

RECTANGULAR MARKET UMBRELLA

1 - finial

1 - umbrella frame

1 - umbrella cover

(sold separately)

umbrella frame umbrella cover finial

NOTE: Make sure eyelet of finial is

aligned with the inset nut on top of

umbrella frame.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
RECTANGULAR MARKET UMBRELLA COMPONENTS 1 - umbrella frame 1 - finial Thank you for purchasing the Rectangular Market Umbrella. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 1 - umbrella cover (sold separately) Note: 2 people are required to safely assemble this product.
PAGE 2
RECTANGULAR MARKET UMBRELLA umbrella assembly pulley cords knob base assembly (sold separately) 2 Remove knob from base assembly as shown. With the assistance of another adult, fit pole of umbrella assembly into corresponding hole of base assembly (sold separately) as shown. Re-attach knob and turn clockwise to secure. 3 Pull down on pulley cords to raise umbrella at desired height. pin CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.