Assembly Instruction

A
TRIAD WINE TOWER
Page 2 of 5 Made in China - r05
1 Insert 4 cam screws into left and right side panels as
shown. Secure, but do not over tighten, cam screws with a
phillips head screwdriver.
3 Fit dowels of fixed shelf, middle panel, and bottom
panel into corresponding holes of left side panel as shown.
Using a screwdriver, turn cams of middle and bottom panel
clockwise until it securely engages each cam screw.
NOTE: Do not over
tighten the cam screws
2 Insert 4 cams into middle panel and bottom panel as
shown. Make sure arrows on each cam point towards
nearest edge with holes.
4 A) Slide back panel into corresponding grooves of
middle and bottom panel as shown.
B) Fit dowels of left side panel into corresponding holes of
assembled unit. Secure all cams of middle and bottom
panels.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
left and right
side panels
middle
panel
bottom
shelf
fixed
shelf
middle
panel
bottom
panel
right side
panel
left side
panel
back
panel
B
NOTE: Make sure groove
of right side panel is
assembled as shown
B
NOTE: Make sure
arrows on each cam
point towards nearest
edge with holes.