Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Triad Wine Tower

TRIAD WINE TOWER

ASSEMBLY HARDWARE

WALL MOUNTING HARDWARE

TOOLS REQUIRED

phillips head screwdriver

allen wrench (included)

Made in China - r05

Page 1 of 5

2 - medium

screws

8 - cams

2 - large

screws

4 - wine rack

panels

1 - back panel

Missing hardware?

Please call

800.606.6387 for

replacements.

2 - side panels

(1 left, 1 right)

8 - cam

screws

Thank you for purchasing the Triad Wine Tower. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

(We recommend the use of hand tools instead of power tools)

1 - drawer

right side

1 - drawer

left side

1 - drawer bottom

1 - phillips

bolt

8 - screws

1 - pull 2 - wood

dowels

2 - plastic

anchors

2 - wall

brackets

1 - wall

straps

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

COMPONENTS

1 - top panel 1 - middle panel 1 - bottom panel

1 - fixed shelf 1 - tray (pull

pre-attached)

1 - drawer

back

1 - drawer

front

4 - allen

bolts

Summary of content (5 pages)

PAGE 1
TRIAD WINE TOWER ASSEMBLY HARDWARE 8 - cams 4 - allen bolts 8 - cam screws 1 - pull 1 - phillips bolt 8 - screws Missing hardware? Please call 800.606.6387 for replacements. 2 - wood dowels WALL MOUNTING HARDWARE 2 - medium 2 - large screws screws Thank you for purchasing the Triad Wine Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
TRIAD WINE TOWER NOTE: Make sure arrows on each cam point towards nearest edge with holes. NOTE: Do not over tighten the cam screws middle panel left and right side panels bottom shelf 1 Insert 4 cam screws into left and right side panels as shown. Secure, but do not over tighten, cam screws with a phillips head screwdriver. 2 Insert 4 cams into middle panel and bottom panel as shown. Make sure arrows on each cam point towards nearest edge with holes.
PAGE 3
TRIAD WINE TOWER BACK VIEW OF TRAY allen bolt 90º tray tray stopper NOTE: Do not over tighten the bolts top panel 5 Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure top panel with 4 allen bolts, using an allen wrench. Do not over tighten the bolts. 6 With the assistance of another adult, carefully position unit upright. Insert tray halfway into assembled unit as shown. Locate 2 tray stoppers on back of tray and turn each stopper 90º.
PAGE 4
TRIAD WINE TOWER wood dowels phillips bolt pull 9 Attach pull to drawer front with 1 phillips bolt as shown. Secure bolt with an phillips head screwdriver. drawer assembly 10 Insert drawer assembly half-way into assembled unit and insert 1 wood dowel into each side. At this point, fully push drawer into assembled unit. FRONT VIEW wide wine rack panel wine rack assembly 1 narrow wine rack panel wine rack assembly 2 wide 12 Insert 2 wine rack assemblies into assembled unit as shown.
PAGE 5
TRIAD WINE TOWER WALL C plastic anchor wall F strap wall bracket wall bracket large D screw A medium screw Safety Mounting Assembly For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach wall bracket to top of unit using 2 medium screws as shown. B) Determine the final location of unit.