Assembly Instruction

TRIAD HIGH DINING TABLE
Made in China - r09 Page 2 of 2
2 A) With the assistance of another adult, place table-
top face down onto a clean, padded surface. Fit dowels
of tabletop into corresponding holes of leg frame, and
attach with 4 bolts, 4 spring washers, and 4 flat
washers as shown. Do not fully tighten bolts.
B) Fit dowel of crossbar into corresponding hole of leg
frame as shown. Using a small allen wrench, turn
pre-attached set screw of cam clockwise until it is
securely engages the screw post.
tabletop
crossbar
large allen
wrench
3 A) Fit dowel of crossbar into corresponding hole of
remaining leg frame as shown. Secure set screw.
B) Fit dowels of tabletop into corresponding holes of leg
frame, and attach with 4 bolts, 4 spring washers, and 4
flat washers. At this point, fully tighten all bolts with a
large allen wrench. Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
A
bolt
spring washer
flat washer
B
B
B
set
screw
small allen
wrench
screw
post
B
leg
frame
crossbar
B
A
NOTE: Do not fully
tighten the bolts