Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r09 Page 1 of 2

Thank you for purchasing the Triad High Dining Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TRIAD HIGH DINING TABLE

Missing hardware? Please call 800.606.6387 for replacements.

2 - leg frames

1 - tabletop

1 - crossbar

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - small allen wrench

(included)

8 - bolts

8 - spring

washers

8 - flat

washers

2 - screw

posts

2 - cams

1 - large allen wrench

(included)

1 A) Insert 1 screw post into each leg frame as

shown.

B) Insert 2 cams into crossbar as shown. Using a

small allen wrench, make sure holes of cam and

crossbar are aligned.

leg frame

crossbar

NOTE: Make sure holes of

cam and crossbar are aligned

NOTE: Do not over

tighten the screw posts

PAGE 1
TRIAD HIGH DINING TABLE HARDWARE 8 - bolts 2 - screw posts 8 - spring washers 8 - flat washers 2 - cams Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Triad High Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
TRIAD HIGH DINING TABLE small allen wrench 2 A) With the assistance of another adult, place tabletop face down onto a clean, padded surface. Fit dowels of tabletop into corresponding holes of leg frame, and attach with 4 bolts, 4 spring washers, and 4 flat washers as shown. Do not fully tighten bolts. B) Fit dowel of crossbar into corresponding hole of leg frame as shown. Using a small allen wrench, turn pre-attached set screw of cam clockwise until it is securely engages the screw post.