Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Trestle Sideboard

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r06 Page 1 of 5

Thank you for purchasing the Trestle Sideboard. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TRESTLE SIDEBOARD

Missing hardware? Please call 800.606.6387 for replacements.

1 - top

assembly

(We recommend the use of hand tools instead of power tools)

1 - bottom

panel

1 - back panel

2 - side panels

(1 left, 1 right)

2 - door fronts

(1 left, 1 right)

1 - partition 2 - shelves 1 - crossbar

2 - pulls

20 - small

screws

6 - small

flat washers

14 - spring

washers

6 - small

bolts

4 - pull

bolts

8 - large

bolts

8 - shelf

supports

2 - large

screws

phillips head screwdriver flat head screwdriver

8 - large

flat washers

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 - barrel

nuts

2 - barrel

screws

2 - set

screws

4 - hinges

16 - hinge

screws

Summary of content (5 pages)

PAGE 1
TRESTLE SIDEBOARD HARDWARE 14 - spring washers 6 - small 8 - large flat washers flat washers 2 - large screws 4 - pull bolts 2 - barrel screws 2 - barrel nuts 6 - small bolts 20 - small screws 8 - large bolts 2 - set screws 16 - hinge screws 8 - shelf supports 4 - hinges Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Trestle Sideboard. This page lists all the contents included in the box.
PAGE 2
TRESTLE SIDEBOARD NOTE: Do not over tighten the barrel screws NOTE: Make sure hole of barrel screw faces end of panel left side panel A top assembly B right side panel crossbar NOTE: Make sure hole of barrel nut aligns with nearest edge with holes 1 A) Insert 2 barrel screws into left and right side panels. Secure, but do not over tighten, barrel screws with a flat head screwdriver. Make sure to align hole of each barrel screw so it faces the ends of each panel as shown.
PAGE 3
TRESTLE SIDEBOARD A NOTE: Make sure set screw is securely engaged with barrel screw left side panel A B B crossbar 5 A) Fit dowels of assembled unit into corresponding holes of left side panel. Secure top assembly with 4 large flat washers, 4 spring washers and 4 large bolts as shown, using a screwdriver. B) Secure left side panel to bottom panel with 2 small flat washers, 2 spring washers and 2 small bolts as shown. 6 Fit barrel screws of left side panel into corresponding hole in crossbar as shown.
PAGE 4
TRESTLE SIDEBOARD Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges A left door front shelf support A B B pull right door front 9 A) Attach left and right door fronts to assembled unit as shown. Secure each hinge with 2 hinge screws. B) Attach 2 pulls to left and right door fronts as shown. Secure each pull with 2 pull bolts. 10 Insert 8 shelf supports at desired shelf heights as shown. drawer A B shelf 11 A) Fit drawers into assembled unit as shown.
PAGE 5
TRESTLE SIDEBOARD CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated. 1) Side to side adjustment: Loosen screw A, adjust gap with screw B and re-tighten screw A.