Assembly Instruction

2 A) Fit dowels of leg crossbar into corresponding holes

of left and right legs as shown.

B) Insert 1 set screw into each barrel nut as shown. Secure

set screws with a phillips head screwdriver. Make sure

each set screw securely engages with barrel screw.

3 A) Insert 2 barrel nuts into table crossbar as shown.

B) Fit dowels of table crossbar into corresponding holes of

leg frames as shown. Insert 1 set screw into each barrel

nut as shown, and secure with a screwdriver. Make sure

each set screw securely engages with barrel screw.

4 With the assistance of another adult, carefully position

tabletop upside down on a clean, padded surface as

shown. Attach leg assembly to apron of tabletop with 2

bolts, 2 spring washers and 2 flat washers per leg.

Secure, but do not over tighten, bolts with an allen wrench.

Assembly is now complete.

Hold tabletop end. Reach under and push slide bars in.

Gently drop tabletop down. Repeat steps for remaining

end.

Made in Vietnam - r03 Page 2 of 2

TRESTLE DROP-LEAF TABLE

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

NOTE: Do not over tighten

the bolts

NOTE: Make sure set

screw is securely engaged

with barrel screw

CLEANING AND CARE

DROP-LEAF EXTENSION

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

wood is finished with a protective clear lacquer.