Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Trestle Drop-Leaf Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

1 A) Insert 1 barrel screw into both left and right legs. Secure,

but do not over tighten, barrel screws with a flat head

screwdriver. Make sure to align hole of each barrel screw so it

faces the ends of each leg as shown.

B) Insert 2 barrel nuts, 1 barrel screw into each leg crossbar as

shown. Using a flat head screwdriver, align hole of each barrel nut

with the nearest edge with holes.

Made in Vietnam - r03 Page 1 of 2

Thank you for purchasing the Trestle Drop-Leaf Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TRESTLE DROP-LEAF TABLE

Missing hardware?

Please call 800.606.6387 for replacements.

1 - tabletop

8 - flat

washers

phillips head screwdriver allen wrench (included)

(We recommend the use of hand tools instead of power tools)

8 - bolts 8 - spring

washers

2 - right

legs

2 - left

legs

1 - table

crossbar

2 - leg

crossbars

flat head screwdriver

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

6 - barrel

nuts

6 - barrel

screws

6 - set

screws

NOTE: Make sure

hole of barrel nut

aligns with nearest

edge with holes

NOTE: Do not over tighten

the barrel screws

NOTE: Make sure hole

of barrel screw faces

end of leg

Summary of content (2 pages)

PAGE 1
TRESTLE DROP-LEAF TABLE HARDWARE 8 - bolts 8 - flat washers 8 - spring washers 6 - barrel screws 6 - barrel nuts 6 - set screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Trestle Drop-Leaf Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
TRESTLE DROP-LEAF TABLE A NOTE: Make sure set screw is securely engaged with barrel screw B B 2 A) Fit dowels of leg crossbar into corresponding holes of left and right legs as shown. B) Insert 1 set screw into each barrel nut as shown. Secure set screws with a phillips head screwdriver. Make sure each set screw securely engages with barrel screw. 3 A) Insert 2 barrel nuts into table crossbar as shown. B) Fit dowels of table crossbar into corresponding holes of leg frames as shown.