Assembly Instruction

Made in China - r05 Page 4 of 4
TOTEM
SHELVING
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
With the assistance of another adult, carefully stack units.
Locate pilot holes on the back of each unit. Attach 2 mount-
ing plates onto back of both units with 4 screws. Using a
screwdriver, secure screws but do not over tighten.
Repeat steps for each additional shelf purchased.
NOTE: Do not stack over 4 units high.
INSTRUCTIONS FOR ASSEMBLING ADDITIONAL SHELVES
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
SAFETY MOUNTING INSTRUCTIONS
For shelves stacked 2 units or higher, it is recommended that
the wall mounting hardware be installed. For safe mounting,
it is essential to use wall anchors appropriate to your wall
type (i.e. plaster, drywall, concrete, etc.). Mount to wood
studs whenever possible.
A. Insert large screw through wall anchor strap and into the
wall anchor.
B. Insert small screw through wall anchor strap and into the
top back of unit.
Mounting assembly is now complete.
NOTE:
If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional
or your local hardware store.
wall
screw
wall
strap
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
WALL
NOTE: Insert screws 3/4"-1"
from the edge of the strap