Assembly Instruction

Made in China - r05 Page 2 of 4
TOTEM
SHELVING
A
B
NOTE: Make sure arrows
on each cam point toward
the nearest edge with holes
2 Fit dowels of back leg panel into corresponding holes
of side leg panels. Using a screwdriver, turn each cam
clockwise until it securely engages the cam screw.
1 A) Insert 6 cams and 6 wood dowels into back leg
panel as shown. Make sure arrows on each cam point
toward nearest edge with holes.
B) Insert 2 cams, 2 cam screws, and 2 wood dowels into
side leg panels as shown. Secure, but do not over tighten,
cam screws with a phillips head screwdriver.
A
B
3 Insert 6 cam screws to underside of bottom panel
as shown.
4 A) Fit dowels of leg assembly into corresponding holes
of bottom panel as shown. Secure all cams.
B) Insert 8 cam screws into top of bottom panel as
shown.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com