Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Totem Stacking Bookcase

TOTEM SHELVING

Made in China - r05 Page 1 of 4

Thank you for purchasing the Totem Shelving. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

ASSEMBLY HARDWARE

WALL MOUNTING HARDWARE

COMPONENTS

2 - back panels 1 - back leg

panel

2 - side leg

panels

1 - top panel 1 - bottom panel 4 - side panels

26 - cam

screws

26 - cams

phillips head screwdriver

(We recommend the use of hand tools over power tools)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

4 - screws

2 - mounting

plates

26 - cam

covers

26 - wood

dowels

1 - wall

strap

1 - wall

screw

Summary of content (4 pages)

PAGE 1
TOTEM SHELVING ASSEMBLY HARDWARE 26 - cam screws 26 - cams 4 - screws 26 - cam covers 26 - wood dowels WALL MOUNTING HARDWARE 2 - mounting plates 1 - wall screw 1 - wall strap Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Totem Shelving. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
TOTEM SHELVING NOTE: Make sure arrows on each cam point toward the nearest edge with holes A B 1 A) Insert 6 cams and 6 wood dowels into back leg panel as shown. Make sure arrows on each cam point toward nearest edge with holes. B) Insert 2 cams, 2 cam screws, and 2 wood dowels into side leg panels as shown. Secure, but do not over tighten, cam screws with a phillips head screwdriver. 2 Fit dowels of back leg panel into corresponding holes of side leg panels.
PAGE 3
TOTEM SHELVING NOTE: Make sure grooves of side panels face each other as shown B A 5 Insert 4 cams and 4 wood dowels into side panels as shown. 6 A) Fit dowels of side panels into corresponding holes of bottom panel as shown. Make sure grooves of side panels face each other as shown. Secure cams. B) Fit back panel into grooves of each side panel assembly as shown. A B 7 Insert 8 cam screws into top panel as shown.
PAGE 4
TOTEM SHELVING INSTRUCTIONS FOR ASSEMBLING ADDITIONAL SHELVES With the assistance of another adult, carefully stack units. Locate pilot holes on the back of each unit. Attach 2 mounting plates onto back of both units with 4 screws. Using a screwdriver, secure screws but do not over tighten. Repeat steps for each additional shelf purchased. NOTE: Do not stack over 4 units high.