Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
TOSCANA KITCHEN CART
Page 6 of 7
Made in USA - r03
19 With the assistance of another adult, place table top
assembly into position, aligning holes in L brackets with
holes in legs. Secure each L bracket with a 5/8" x #6
screw.
18 Place the table top and drop leaves upside down on a
padded surface as shown.
A. Fasten the L brackets to the underside of the table
top as shown with 5/8" x #6 screws.
B. Attach 1 drop leaf to either side of the table top with 2
hinges per side. Fasten each hinge with 1/2" x #5
screws.
C. Attach 2 drop leaf supports as shown with four 5/8" x
#8 screws as shown.
17 A. Attach drawer pull with 2 pull screws fastened
from the inside of the drawer front.
B. Attach 1 drawer glide to each drawer side and secure
with two 5/8" x #5 screws.
Make sure wheels of
glides are at back of drawer
16 A. Insert 2 screw posts into the back side of the
drawer front as shown.
B. Fit screw posts of drawer front into the drawer sides
and secure each post with 1 set screw.