Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
TOSCANA KITCHEN CART
Page 4 of 7
Made in USA - r03
11 Fit 4 casters into caster inserts as shown, gently
tapping into place with a hammer if necessary. Make sure
the locking casters are inserted into the front legs, as
shown.
10 Fit left side panel assembly onto slat shelf and
back panel. Secure all cam posts with 4 set screws.
9 A. Fit slat shelf assembly onto screw posts of right leg
frame. Secure with 2 set screws.
B. Fit back panel onto leg assembly and secure from
inside with 2 set screws.
A
B
8 A. Gently tap 2 short steel pins into the ends of each
shelf slat with a hammer.
B. Fit corresponding holes of front and back shelf
supports onto pins.
A
B
Locking casters
at front