Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
TOSCANA KITCHEN CART
Page 3 of 7
Made in USA - r03
7 Repeat Steps 3-6 for the left side panel assembly.
6 Secure side panel assembly by inserting 1 set
screw into each barrel nut. Tighten each set screw
with a phillips head screwdriver. The set screws are
self-centering and should be easy to tighten. If not,
adjust the position of the screw post by tightening or
loosening it. See the illustrations above for reference.
5 A. Slide 1 side panel into slot of top and bottom braces
until edge is flush to the vertical brace.
B. Fit 1 vertical side brace flush to exposed edge of side
panel. Insert 1 long steel pin into center hole.
C. Fit screw posts of right front leg into corresponding
holes in top and bottom braces.
B
A
C
INCORRECT
Post needs to be screwed deeper
INCORRECT
Post needs to be backed out
CORRECT
Set screw secures post properly
4 A. Fit top and bottom side braces onto screw posts of
right back leg, making sure slotted edges of braces face
each other.
B. Slide 1 vertical side brace into slot of top and bottom
braces so that it is flush with with leg. Insert 1 long steel pin
as shown.
A
B
Slots in
top & bottom braces
face one another