Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Toscana Kitchen Cart

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

Thank you for purchasing

the Toscana Kitchen

Cart. This page lists all

the contents included in

the box. Please take

time to identify the

hardware as well as the

individual components of

this product. As you

unpack and prepare for

assembly, place the

contents on a carpeted or

padded area to protect

them from damage.

Note: 2 people are

required to safely

assemble this product.

COMPONENTS

2 - drop leaves 1 - back panel

TOOLS REQUIRED

Flat Head Screwdriver

Phillips Head Screwdriver

Hammer

+

1 - table top

2 - side panels 2 - shelves

2 - bottom side braces 4 - vertical side braces

2 - top side braces

2 - glide supports

1 - right back leg

1 - right front leg

1 - left front leg

1 - left back leg

1 - door

1 - drawer bottom

2 - shelf cross braces

5 - shelf slats

1 - drawer front

1 - left drawer side

1 - right drawer side

1 - drawer back

TOSCANA KITCHEN CART

Page 1 of 7

Made in USA - r03

Missing hardware? Please call 800.606.6387 for replacements.

4 - drop

leaf hinges

2 - door

hinges

1 - magnetic

door catch w/

plate & screws

(in a separate package)

1 - drawer

pull

18 - set

screws

18 - post

screws

18 - barrel

nuts

24 - 1/2" x #9

bronze screws

4 - L

brackets

2 - drop leaf

supports

3 - pull screws 1 - door

pull

1 set - drawer

glides

4 - caster

inserts

2 - casters

2 - locking

casters

4 - 5/8" x #5

screws

12 - 5/8" x #6

screws

8 - 5/8" x #8

screws

8 - long

steel pins

8 - 1-1/4" x #8 screws 8 - 1/2" x #8 screws 20 - short steel pins

Summary of content (7 pages)

PAGE 1
TOSCANA KITCHEN CART HARDWARE Thank you for purchasing the Toscana Kitchen Cart. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
TOSCANA KITCHEN CART A Right Back Leg IMPORTANT INSTALLATION NOTE FOR INSTALLING SCREW POSTS B Right Front Leg C Left Front Leg a. Dip threads of the screw post in vegetable oil. b. Align threaded end of post with the corresponding hole in the wood. Tap on the slotted end with a hammer until threads enter, then fully tighten using a flat head screwdriver. DO NOT TRY TO HAMMER THE POST ALL THE WAY IN AS IT WILL STRIP THE POST HOLE AND NOT BE AN EFFECTIVE CONNECTOR. c.
PAGE 3
TOSCANA KITCHEN CART A B Slots in top & bottom braces face one another 4 A. Fit top and bottom side braces onto screw posts of right back leg, making sure slotted edges of braces face each other. B. Slide 1 vertical side brace into slot of top and bottom braces so that it is flush with with leg. Insert 1 long steel pin as shown. B A C 5 A. Slide 1 side panel into slot of top and bottom braces until edge is flush to the vertical brace. B. Fit 1 vertical side brace flush to exposed edge of side panel.
PAGE 4
TOSCANA KITCHEN CART B A A B 8 A. Gently tap 2 short steel pins into the ends of each shelf slat with a hammer. B. Fit corresponding holes of front and back shelf supports onto pins. 9 A. Fit slat shelf assembly onto screw posts of right leg frame. Secure with 2 set screws. B. Fit back panel onto leg assembly and secure from inside with 2 set screws. Locking casters at front 10 Fit left side panel assembly onto slat shelf and back panel. Secure all cam posts with 4 set screws.
PAGE 5
TOSCANA KITCHEN CART IMPORTANT NOTE: The knuckle of each hinge must face out and overlap the door for proper fit. If the hinge is not properly oriented the door will not close. A B 12 With the assistance of another adult, place assembly upright. A. Attach 2 drawer glide supports to the inside of the side panels with two 1-1/4"x#8 screws per support. B. Attach the drawer glides to the drawer glide supports with two 5/8" x #6 screws as shown. 13 A.
PAGE 6
TOSCANA KITCHEN CART Make sure wheels of glides are at back of drawer 16 A. Insert 2 screw posts into the back side of the drawer front as shown. B. Fit screw posts of drawer front into the drawer sides and secure each post with 1 set screw. 17 A. Attach drawer pull with 2 pull screws fastened from the inside of the drawer front. B. Attach 1 drawer glide to each drawer side and secure with two 5/8" x #5 screws. 18 Place the table top and drop leaves upside down on a padded surface as shown. A.
PAGE 7
TOSCANA KITCHEN CART CLEANING AND CARE Clean spills on surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. The wood top is treated with mineral oil. It is suggested to re-oil the base and top once a month. After applying the mineral oil, make sure the finish is fully dry before using. 20 A. Fit 2 shelves into assembly, making sure middle shelf is firmly supported by the steel pins. B. Insert drawer assembly into case, fitting wheels on drawer glides into rail of cabinet glides.